Changing Of The Units With Starter - Siemens SINAMICS G120 Operating Instructions Manual

Functions
9.9 Application-specific functions
9.9.2.5

Changing of the units with STARTER

The converter must be in the offline mode in order to change over the units.
STARTER shows whether you change settings online in the converter or change offline in
the PC (
You switch over the mode using the adjacent buttons
in the menu bar.
Procedure
● Go to the "Units" tab in the configuration screen form to change over the units.
③
④
⑤
Figure 9-22
 Save your settings and go online.
 Accept these settings in the
204
/
Changing over the unit system
Selecting process variables of the technology controller
adapting to the line supply
Unit changeover
In this case, the converter detects
that other units or process
variables have been set offline
than are actually in the converter;
the converter displays this in the
following screen form:
converter.
).
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB