Siemens SINAMICS G120 Operating Instructions Manual page 252

Data backup and series commissioning
10.1 Backing up and transferring settings using memory card
Procedure using STARTER
● Go online with STARTER.
●
●
●
●
● Close the screen forms.
Procedure with the BOP-2
 Start data transfer in the menu "EXTRAS" - "TO CRD".
250
①
In your drive, select "Drive Navigator".
②
Select the "Commissioning" button.
③
Select the button to transfer the settings to the memory card.
④
Select the settings as shown in the diagram and start the data backup.
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB
OK
OK