Siemens SINAMICS G120 Operating Instructions Manual page 254

Data backup and series commissioning
10.1 Backing up and transferring settings using memory card
Procedure using STARTER
● Go online with STARTER.
●
●
●
●
● Close the screen forms.
● Go offline with STARTER.
● Switch off the converter power supply.
● Wait until all LED on the converter go dark. Now switch on the converter power supply
252
①
In your drive, select "Drive Navigator".
②
Select the "Commissioning" button.
③
Select the button to transfer the data from the memory card to the converter.
④
Select the settings as shown in the diagram and start the data backup.
again. Your settings only become effective after this power-on reset.
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB