Siemens SINAMICS G120 Operating Instructions Manual page 256

Data backup and series commissioning
10.1 Backing up and transferring settings using memory card
Procedure with the BOP-2
 Go to parameter p9400. If a memory card is correctly inserted, then
 Set p9400 = 2 The BOP-2 displays "BUSY" for several seconds
 For Bei p9400 = 3 you may remove the memory card.
 For p9400 = 100, you may not remove the memory card at the
254
p9400 = 1.
and then jumps to either p9400 = 3 or p9400 = 100.
moment.
In this case, try again by setting p9400 = 2.
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB
OK
OK