Introduction
Scope of validity
These operating instructions apply to the following devices:
• SCALANCE XCM102
Unless mentioned otherwise, the descriptions in these operating instructions refer to
all devices of the SCALANCE XCM-100 product group specified in the scope of validity.
1.1
Designations used
This section describes the conventions used in this document to clearly and efficiently portray
information.
Classifica‐
tion
Product
group
Device
1.2
Trademarks
The following and possibly other names not identified by the registered trademark sign ® are
registered trademarks of Siemens AG:
• SCALANCE
• SINEC
1.3
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary here:
• SIMATIC NET Manual Collection or product DVD
The DVD ships with certain SIMATIC NET products.
• On the Internet under the following address:
50305045 (https://support.industry.siemens.com/cs/ww/en/view/50305045)
SCALANCE XCM-100 Media Converter
Operating Instructions, 07/2022, C79000-G8976-C659-01
Description
If information applies to all devices and versions of a product
group, the term SCALANCE XCM-100 is used.
If information relates to a specific device, the device name is
used.
1
Terms used
SCALANCE XCM-100
e.g. SCALANCE XCM102
5