Siemens SINAMICS G120 Operating Instructions Manual page 74

Basic commissioning
6.5 Basic commissioning with STARTER
Display options
In this area, you can set how the measurement results are displayed.
● Repeat measurement:
● Arrange curves in tracks
● Measuring cursor on:
Figure 6-7 Trace dialog box
72
This means that you place the measurements, which you wish to perform at different
times, one above one another
This means that you define as to whether all measured values are to be displayed with a
common zero line – or whether each measured value is displayed with its own zero line.
This allows you to analyze the measuring intervals in detail
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB