Siemens SINAMICS G120 Operating Instructions Manual page 325

In the screen form that opens,
HW Config proposes the next
free IP address and a subnet
mask. If you have configured a
local area network, and are not
working within a larger Ethernet
network, you can use the
proposed entries. Otherwise, ask
your administrator about the IP
addresses for the PROFINET
participants and subnet mask.
The subnet mask must have the
same address that you assigned
when addressing the supervisor.
Use the "New" button (
one.
Assign a name for your PROFINET network there. Additional modifications are not
necessary. Exit this screen form and the next one with OK.
In the next step, select the bus (
insert the converter (
Open the properties window of the converter
⑤
(
device name for the converter. You will also
find the proposed IP address in this screen
form. If required, you can change the IP
address via "Properties".
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB
①
) to either create a new PROFINET subnet or select an existing
③
) and then the communication telegram (
Standard
) and enter a unique and descriptive
Standard
②
), and via the hardware catalog using drag-and-drop, first
Hardware catalog
Appendix
A.3 Application examples
④
).
323