Magnet Roll Mnt, Spacer Dev Mnt - Oki LP-1040 Maintenance Manual

9.6.5

MAGNET ROLL MNT, SPACER DEV MNT

<Removal>
1.
Remove the DEVELOPER UNIT
(see p. 9-35).
2.
Remove the stopper with the two screws and
wave washer on the right side of the
DEVELOPER UNIT.
3.
Remove all the gears from the left side of the
DEVELOPER UNIT.
(a) Remove the E-ring from gear (idler) 2,
and remove gear (idler) 2.
(b) Remove gear (idler) 1.
(c) Remove the E-ring from gear (magnet
roller) and remove gear (magnet roller).
Cautionary Notes When Performing
Installation
The gear (magnet roller) has a front and back
side. When installing, be sure that the silver side
is pointing to the outside.
(d) Remove the two screws.
Chapter 9 Parts Disassembly, Assembly, and Replacement
Stopper
Wave washer
9-41