Oki LP-1040 Maintenance Manual page 432

12.
Remove the R-ring and bearing fixing the
ROLLER REGIST SHAFT's left side.
13.
Temporarily slide the ROLLER REGIST
SHAFT to the left direction.
14.
Slide the ROLLER REGIST SHAFT to the
right direction, and set the TORQUE
LIMITTER REGIST so that it protrudes on the
opening area for maintenance.
TORQUE LIMITTER REGIST MNT on
the opening area for maintenance
15.
Remove the TORQUE LIMITTER REGIST
from the ROLLER REGIST SHAFT.
Chapter 9 Parts Disassembly, Assembly, and Replacement
ROLLER REGIST SHAFT
ROLLER REGIST SHAFT
ROLLER REGIST SHAFT
TORQUE LIMITTER REGIST
TORQUE LIMITTER
REGIST
9-145