Table 2-9 Information And Its Contents On The Type Of Paper Used When An Error Occurred - Oki LP-1040 Maintenance Manual

(2) Information about the type of paper used when an error occurred and the contents of that
information
The meanings of the six characters representing the paper information at the time of an error
are shown in the table below.

Table 2-9 Information and Its Contents on the type of paper used when an error occurred

First and Second Characters
(Roll paper position)
Rx (x: the roll number)
Third and Fourth Characters
Fifth and Sixth Characters
2-12
(Type of paper)
N
T1
T2
F
(Paper width)
A0
A1
A2
A3
Roll position
Roll paper position is unknown.
Plain paper
Tracing paper (Tracing Paper Mode 1)
Tracing paper (Tracing Paper Mode 2)
Film
Paper type is unkown.
Roll papers identified by the Printer as A0 width (841 mm width
(33.11 inches)), e.g., with the following width:
880 mm, 900 mm, 910 mm, 914 mm,
30 inches, 34 inches, 36 inches
width roll paper, etc.
Roll paper identified by the Printer as A1 width (594 mm (23.39
inches) width), e.g., with the following width:
610 mm, 620 mm, 700 mm, 707 mm,
22 inches, 24 inches
width roll paper, etc.
Roll paper identified by the Printer as A2 width (420 mm
(16.54 inches)width), e.g., with the following width:
440 mm, 450 mm, 500 mm
15inch, 17 inches, 18 inches
width roll paper, etc.
Roll paper identified by the Printer as A3 width (297 mm (11.69
inches) width), e.g., with the following width:
310 mm,
11 inches, 12 inches,
width roll paper, etc.
Paper Width Unknown
Meaning
Meaning
Meaning