Oki LP-1040 Maintenance Manual page 582

(iii) With B as a baseline, A is shifted in the paper feed direction and C is shifted in the opposite
10-50
of the paper feed direction
Increase the value for:
Parameter - In 700s - 709
and decrease the value for:
Parameter - In 700s - 710
(An adjustment value of 1 will cause a shift of 0.64 m.)
If image misalignment is still found after adjusting these values, set in units of lines. So
decrease the values for:
Parameter - In 700s - 711; and
Parameter - In 700s - 712
C
Paper feed direction
After adjusting in units of lines, fine adjustments are required. Check the direction of the
misalignment and set:
Parameter - In 700s - 709; and
Parameter - In 700s - 710
to their optimal values.
B
A