Oki LP-1040 Maintenance Manual page 83

(4) Cut Length Adjustment
Executes a print operation for the cut length adjustment.
Selecting Print Length or Paper Type displays the EEPROM and RAM values of the
corresponding engine control parameter.
Use the number pad to change the RAM value.
Click the Save button to save the RAM Value in the EEPROM.
Note
Table 2-37 Executable Items Under the Cut Length Adjustment Menu (1)
Item Name
Print Length
Paper Width
Paper Ttype
Print Copies
For models with multiple rolls, the upper roll is prioritized for paper supply.
If the upper roll is empty, the roll below is used.
2-34
◇ A confirmation window appears when you click the Save button.
When saving the new parameter, not only the value for the currently displayed
screen, but all RAM values that have been changed at this point are saved.
Option
2523 mm
1682 mm
841 mm
297 mm
210 mm
A0
A1
A2
A3
See the table Correspondence between roll papers and paper widths page
2-5 for the roll papers corresponding to each width.
Paper
Tracing
Film
1
2
3
2523mm = 99.33 inches = 8413
1682mm = 66.22 inches = 8412
841 mm = 33.11 inches
297 mm = 11.69 inches
210 mm = 8.27 inches
Roll papers identified by the Printer as A0 width
Roll papers identified by the Printer as A1 width
Roll papers identified by the Printer as A2 width
Roll papers identified by the Printer as A3 width
Plain paper
Tracing paper
Film
Print 1 page.
Prints 2 pages continuously.
Prints 3 pages continuously.
Meaning
(59599 lines)
(39732 lines)
(19866 lines)
(7016 lines)
(4961 lines)