Oki LP-1040 Maintenance Manual page 374

17.
Remove the two screws on the right and the
two screws on the left from the bottom of the
unit as shown in the photo.
18.
Loosen the screw for adjusting the alignment
on the left side of the unit until it is out of the
screw hole.
19.
Remove the SHEET CARBON BR MNT with
three screws as shown in the photo.
Also unplug the halogen heater connector.
Also, remove the SL01's connector in the
opposite side.
Chapter 9 Parts Disassembly, Assembly, and Replacement
9-87