Oki LP-1040 Maintenance Manual page 86

Table 2-40 Executable Items Under the Remaining Paper Based Menu (1)
Item Name
Print Length
Paper Width
See the table Correspondence between roll papers and paper widths page
2-5 for the roll papers corresponding to each width.
Paper Ttype
Print Copies
For models with multiple rolls, the upper roll is prioritized for paper supply.
If the upper roll is empty, the roll below is used.
Table 2-41 Executable Items Under the Remaining Paper Based Menu (2)
Item Name
Parameter No.
EEPROM Value
Table 2-42 Executable Items Under the Remaining Paper Based Menu (3)
Recommended
Item Name
Input Range*
RAM Value
*: Values between 0 and 65535 can be entered.
Option
2523 mm
2523mm = 99.33 inches = 8413
1682 mm
1682mm = 66.22 inches = 8412
841 mm 841 mm = 33.11 inches
297 mm 297 mm = 11.69 inches
210 mm 210 mm =
A0 Roll papers identified by the Printer as A0 width
A1 Roll papers identified by the Printer as A1 width
A2 Roll papers identified by the Printer as A2 width
A3 Roll papers identified by the Printer as A3 width
Paper Plain paper
Tracing Tracing paper
Film Film
1 Print 1 page.
2 Prints 2 pages continuously.
3 Prints 3 pages continuously.
Display
Number of engine control parameter for the cut length
540～551
adjustment.
EEPROM value of engine control parameter for the cut length
1～100
adjustment.
1 - 100 RAM value of engine control parameter for the cut length
adjustment.
Chapter 3 Regular Service Inspectionse
Meaning
(19866 lines)
(7016 lines)
8.27 inches (4961 lines)
Meaning
Meaning
(59599 lines)
(39732 lines)
2-37