(4) When all marks are aligned, click 3 points positioning complete to analyze colors for
CIS_A.
(5) Repeat the steps (3) and (4) for CIS_B to CIS_E (5 times in total).
(6) Click OK when Analysis complete is displayed.
11.2.5.3
Color difference assessment
(1) Launch Color-Difference Check and enter the CIS unit's 5-digit serial number.
(2) Click Execute to run the analyzing tool. When OK is displayed in Judgment, the
procedure is complete.
See the Color-Difference Check instruction manual or details on Color-Difference Check
operations.
Chapter 11 Scanner Calibration
11-85