Oki LP-1040 Maintenance Manual page 145

Error
No.
W LN 8204 Incorrect FTP password
W LN 8205 Successful login
operation to the port for
maintenance
W LN 8211 FTP command format
error
W LN 8212 Unknown command
received by FTP
W LN 8221 FTP command
parameter error (PORT)
W LN 8222 FTP command
parameter error (TYPE)
W LN 8223 FTP command
parameter error (RETR)
W LN 8224 FTP command
parameter error (STOR)
W LN 8225 FTP command
parameter error (DELE)
W LN 8226 FTP command
parameter error (CWD)
W LN 8227 FTP command
parameter error (LIST)
W LN 8228 FTP command
parameter error (RNFR)
W LN 8229 FTP command
parameter error
(RNTO)
W LN 822A FTP command
parameter error (MKD)
W LN 822B FTP command
parameter error (RMD)
W LN 822C FTP command
parameter error (EPRT)
W LN 8281 FTP reception timeout
W LN 8282 FTP control connection
reset
W LN 8301 During data reception,
the connection was
forcedly cut.
W LN C001 Unable to open warning
light driver
W LN C011 FTP reception timeout
W LT 2D01 FTP control connection
reset
W LT 2D02 NAK reception from
warning light
W ML 8700 SMTP server not
configured
W ML 8701 SMTP server
connection error
(insufficient rights)
W ML 8709 SMTP server
connection error
(destination invalid)
W ML 870B SMTP server
connection error
(no usable port)
W ML 870D SMTP server
connection error
(insufficient rights)
Cause User Solution
- Check condition of the host
computer which sent the data.
- Check application.
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
- Check printer driver.
- Check network condition.
- Check application.
ditto
Check the state and
application on the host where
data has been transferred.
- Check printer driver.
- Check network condition.
- Check application on the host
computer.
- Check LAN connection cable.
- Check printer driver.
- Check network condition.
- Check application.
ditto
- Restart the printer.
- Upgrade the firmware to the
latest.
ditto
- Check the warning light
model number to confirm it is
a recommended product.
- Check the serial cables
connection.
- Restart the Printer.
ditto
Check SMTP server address.
Check mail settings.
Check SMTP server settings.
- Restart the printer.
- Upgrade the firmware to the
latest.
- Check printer-side mail
settings.
- Check SMTP-side mail
settings.
Chapter 4 Controller Problems Troubleshooting
Service Engineer
Inspection
(For inspection criteria,
see Reference to
Check/Replace Parts.)
－
－
- Check error log.
- Check transmission
software.
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
- Check error log.
- Check transmission
software.
ditto
Check PCB-ASSY-ARC.
ditto
- Check error log.
- Check transmission
software.
ditto
ditto
ditto
ditto
ditto
Check SMTP server
address.
Check mail settings.
Check SMTP server
settings.
Check PCB-ASSY-ARC.
- Check printer-side mail
settings.
- Check SMTP-side mail
settings.
Reference to
Assumed
Check/Replace
Replacement Part
Parts
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
 P. 4-36 (1)
PCB-ASSY-ARC
 P. 9-55
 P. 9-55
PCB-ASSY-ARC
－ －
－ －
 P. 9-55
PCB-ASSY-ARC
 P. 9-55
PCB-ASSY-ARC
 P. 4-36 (1)
PCB-ASSY-ARC
 P. 9-55
 P. 4-36 (1)
PCB-ASSY-ARC
 P. 9-55
－ －
－ －
－ －
 P. 4-36 (1)
PCB-ASSY-ARC
 P. 9-55
－ －
4-25