Removing External Parts - Oki LP-1040 Maintenance Manual

9.1.2

Removing External Parts

Instructions are given below for removing commonly removed parts (primarily covers) when
disassembling or assembling the printer to replace parts.
Note
 Instructions for removing the document table of the multifunction model are omitted below.
Depending on the situation, raise the document table when working.
 Though the official names for cover parts vary between models, we use their engineering
names here for clarity.
Screws securing plastic external parts should be tighten at 0.8 N·m (8 kg·cm) torque.
9-2