Oki LP-1040 Maintenance Manual page 492

8.
Lift up CIS UNIT, starting with the left side
first.
9.
Remove CIS UNIT while holding down the
center area of the scanner glass.
Note
Be sure to always hold down the center area of
the scanner glass so that the SPACER-CIS does
not fall.
10.
While holding down the center area of the
scanner glass, put the glass surface facing
down and place the CIS UNIT MNT down on
the paper you prepared earlier.
11.
Remove the CBLS-LVDS clamp with one
screw.
Unplug the connector at the same time.
Cautionary Notes When Performing
Installation
When installing the CBLS-LVDS, use the air
blow tool in order to remove any foreign particle
from the connecting part.
Chapter 9 Parts Disassembly, Assembly, and Replacement
CIS UNIT
Hold down
CBLS-LVDS
9-205