The Printer Will Operate For 720 Hour(S) Only Is Displayed On The Ready Screen - Oki LP-1040 Maintenance Manual

4.9

The printer will operate for 720 hour(s) only is displayed on the Ready screen

The message The printer will operate for 720 hour(s) only may be displayed highlighted in
yellow on the Ready screen when the Printer starts.
When the message is displayed, the Printer may be used only for 720 hours.
After 720 hours, you will not be able to use the Printer anymore.
The number of hours remaining to use the Printer is displayed highlighted in yellow.
If the screen above is displayed, perform the following to solve the problem.
●If the EEPROM has not been replaced when replacing the ARC board.
When replacing the ARC board, if you have not replaced the EEPROM of the newly installed
ARC board with the EEPROM of the ARC board you have removed, replace it.
See p.9-55 for the ARC board EEPROM replacement procedure.
●If the product key is not correct.
Select Menu -> Printer Information on the panel to display the product key.
Check that the correct product key is set.
The correct product key is written on the sticker at the rear of the Printer.
If the product key is not correct, select Menu (1/2) -> Menu (2/2) -> Enter Product Key, and
enter the correct product key.
●If the EEPROM is corrupted.
If the error screen displayed in 4.8 EEPROM is corrupted error appears, you need to ask for a
new EEPROM from the manufacturer.
Since you will be able to use the Printer only for 720 hours, ask for a new EEPROM and
replace it within this period.
The time remaining to use the Printer is displayed on the panel.
Firmware options cannot be used until the EEPROM is replaced.
After replacing the corrupted EEPROM with the new EEPROM supplied, enter the option code
again.
4-44