<SC-TOP-COVER removal>
1.
Remove the OVER-SC-R and the
COVER-SC-L with four screws.
2.
Remove the side cover (upper left) (see p.
9-8).
3.
Remove the side cover (upper right) (see p.
9-10).
4.
Remove the PLATE-SIDE-L with two screws
(circled in black) and the
ROTARY-DAMPER-L with two screws
(circled in red).
Remove the developer unit cover if you
have difficulties removing these screws.
Chapter 9 Parts Disassembly, Assembly, and Replacement
SC-TOP-COVER
COVER-SC-L
Developer unit
PLATE-SIDE-L
ROTALY-DAMPER-L
COVER-SC-R
9-193