Oki LP-1040 Maintenance Manual page 296

(4) Removing the side cover (lower left)
<Removal>
1.
Remove the side cover (upper left)
(see p. 9-8).
2.
Close the fuser unit drawer.
Note
Opening the fuser unit drawer affects the weight
balance of the unit, so try to keep it closed if
possible.
3.
Open all roll paper drawers.
4.
Remove the seven screws as shown in the
photo:
- Top one screw;
- Front three screws; and
- Back three screws
5.
Lightly push the top panel forward and lift up
to remove.
Note
Be careful not to tilt too hard as the clamps on
the lower part of the cover may break.
Chapter 9 Parts Disassembly, Assembly, and Replacement
Side cover (lower left)
Fuser unit drawer
Side Cover (Lower
Roll paper drawer
Left)
9-9