Oki LP-1040 Maintenance Manual page 489

2.
Install the ROTARY-DAMPER-L with two
screws (circled in red) and the
PLATE-SIDE-L with two screws (circled in
black).
3.
Install the side cover (upper right).
4.
Install the side cover (upper left).
5.
Install the LCD panel.
6.
When the replacement procedure is finished,
perform the following calibration operations.
(See Chapter 11 Scanner Calibration)
- Scanner calibration
(a) Shading offset calibration
(b) Document advance calibration (motor speed calibration)
(c) Sensor connection calibration in main scanning and subscanning directions (CIS
9-202
connection calibration)
ROTALY-DAMPER-L
PLATE-SIDE-L