Oki LP-1040 Maintenance Manual page 410

9.
Remove the gear on the left edge of ROLLER
HEAT.
10.
Remove the E-rings and gears at the location
shown in the photo so that you can remove
the bearings in step 12.
11.
With a precision screwdriver, remove the
PLATE(EARTH) with three screws on the
right edge of ROLLER HEAT.
Note
Dispose of the three screws you have removed.
During reinstallation, use the new screws
supplied with the ROLLER HEAT MNT.
12.
Remove the HR-WASHER on the right edge
of ROLLER HEAT.
Chapter 9 Parts Disassembly, Assembly, and Replacement
9-123