Oki LP-1040 Maintenance Manual page 356

14.
Remove all screws securing the board to the
tray and remove the LV-PS from the tray.
Note
When replacing the LV-PS, transfer the
CBL-PHTRJP from the old board to the new.
Otherwise, the paper heater will not function
properly.
Cautionary Notes When Performing Installation
Mind the color of the cables connected to
the locations shown in the photo.
- Back side cable: Black
- Front side cable: White
Note
When removing/inserting the cords connected to the locations shown in the above photo, hold
the connector (housing) of the cord and plug it in or unplug it so that it is parallel with the
circuit board. Do not try to plug/unplug at an angle.
Chapter 9 Parts Disassembly, Assembly, and Replacement
CBL-PHTRJP
Black
White
9-69