<Installation>
Note
Adjust the gears engagement after replacing the CLUTCH 4.4.
Required tools:
- Phillips screwdriver
- PUSH-PULL GAUGE: U001280463**
Required jig:
- GEAR-SPACER MNT: U001282138**
1.
Loosen the tension bracket screw.
2.
Lift the tension pulley in the direction of the
arrow, decrease the tension of the timing belt,
and tighten the screw loosened in step 1.
3.
Loosen the three screws securing the wheel
train unit.
Chapter 9 Parts Disassembly, Assembly, and Replacement
Tension bracket
Tension pulley
Wheel train unit
9-47