Oki LP-1040 Maintenance Manual page 472

4.
Remove the two screws of the plate securing
ROTARY-DAMPER-R, shown in the photo.
5.
Remove the ROTARY-DAMPER-R.
6.
Remove the two screws from the plate
securing ROTARY-DAMPER-L, then remove
ROTARY-DAMPER-L.
Note
There is no cover plate on the left side.
7.
Remove the scanner cover, then stand it up
to the right side of the Printer.
Note
Be careful not to knock over the scanner cover
while working.
Chapter 9 Parts Disassembly, Assembly, and Replacement
ROTARY-DAMPER-R
ROTARY-DAMPER-L
9-185