Oki LP-1040 Maintenance Manual page 148

Error
No.
W PD A401 An unsupported HP-GL
or HP-GL/2 command
was received.
W PD A402 An incorrect number of
parameters was passed
to a HP-GL or HP-GL/2
command.
W PD A403 The Printer received:
- A print command
exceeding the
supported range of
the HP-GL or
HP-GL/2 command
parameters; or
- A print command that
used acharacter or
characters not
allowed in parameters
W PD A405 An unsupported HP-GL
or HP-GL/2 character
set command was
received.
W PD A407 A polygon buffer size
overflow error occurred.
W PD A408 No vaild print data was
found in the HP-GL
command, so the data
was discarded.
W PD A500 A large number of
patterns were
registered to a single
drawing and an
overflow has occurred
in the pattern memory.
W PD A501 A large number of
hatches were registered
to a single drawing and
the pattern memory has
overflowed.
W PD A502 There is a large number
of external characters in
the D-SCAN format
data and the external
character memory has
overflowed.
W PD A503 There is no free
memory area for HP-GL
user registration
characters.
W PD A504 The drawing contains a
large amount of data
and an overflow has
occurred in the VMS
memory.
W PD A505 The spool memory has
overflowed.
W PD A506 A polygon buffer size
overflow error occurred.
W PD A507 Program warning
W PD A508 Program warning
W PD A509 Program warning
W PD A50A Program warning
W PD A50B Program warning
W PD A50C Program warning
W PD A50D Program warning
W PD A50E Program warning
W PD A50F Program warning
W PD A510 Program warning
W PD A511 Program warning
W PD A512 Program warning
W PD A513 Program warning
4-28
Cause User Solution
On the computer correct the
error.
ditto
ditto
ditto
ditto
On the computer check that
valid drawing data is
transmitted.
On the computer decrease the
data with pattern registered on
a drawing.
On the computer decrease the
data with hatching on a
drawing.
On the computer decrease the
data with end-user-defined
characters.
Note: This error does not occur
with LP-1040.
Decrease the number of the
end-user-defined characters,
or correct the characters to
decrease their data size.
Decrease the data size of one
drawing.
Note: This error does not occur
with LP-1040.
When the Centering is set to
On, change to Off.
On the computer correct the
error.
Note: The polygon buffer
capacity is 106600 at
maximum.
If the error may be reproduced
and cause problem on the
printout, upgrade the firmware
to the latest.
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
ditto
Service Engineer
Inspection
(For inspection criteria,
see Reference to
Check/Replace Parts.)
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
－ －
Check PCB-ASSY-ARC. PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
ditto PCB-ASSY-ARC
Reference to
Assumed
Check/Replace
Replacement Part
Parts
－
－
－
－
－
－
－
－
－
－
－
－
－
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55
 P. 9-55