Oki LP-1040 Maintenance Manual page 351

<Removal>
1.
Remove the COVER-BACK(L)
(see p. 9-52).
2.
Unplug all four connectors connected to
PCB-ASSY-ASC1.
Cautionary Notes When Performing
Installation
When installing the CBLS-LVDS, use the air
blow tool in order to remove any foreign
particle from the connecting part.
3.
Remove the seven screws securing the
board and remove the PCB-ASSY-ASC1.
Note
Note that the PCB-ASSY-ASC1 is connected to
the PCB-ASSY-ARC via CN10. So, before
removing the PCB-ASSY-ASC1, unplug the
CN10 from the PCB-ASSY-ARC.
9-64
PCB-ASSY-ASC1
CBLS-LVDS
PCB-ASSY-ASC
1