Oki LP-1040 Maintenance Manual page 634

(13) To set the parameter for color scan, on the web interface's Scanner Parameter page, input
the parameter values displayed in steps (9) and (10). Then execute SetParam.
After entering the values, press
the button to set them.
(a): Set the result of the scan image 5 at Color 240 mm/s in the subscanning direction.
(b): Set the result of the scan image 5 at Color 225 mm/s in the subscanning direction.
(c): Set the result of the scan image 6 at Color 150 mm/s in the subscanning direction.
(d): Set the result of the scan image 6 at Color 60 mm/s in the subscanning direction.
(e): Set the result of the scan image 6 at Color 40 mm/s in the subscanning direction.
* Once you have finished changing these settings, always refresh your browser.
11-36
(a)
(b)
(c)
(d)
(e)