Oki LP-1040 Maintenance Manual page 416

5.
Remove the bearing, the gear (a) and the
TORQUE LIMITER.
6.
Remove the E-ring (6) and the gear (b).
7.
Clean the installation shaft of the gear (b)
with a cleaning cloth and apply some
heatproof grease (sesame seed size).
8.
Install the new gear (b) and secure it with the
E-ring (6).
9.
Replace the gear (a) with a new one, and
reinstall the bearing and the TORQUE
LIMITER.
Chapter 9 Parts Disassembly, Assembly, and Replacement
Gear (b)
Gear (e)
E-ring (6)
TORQUE LIMITER
Gear (a)
E-ring (6)
Bearing
9-129