Inch Monitor Unit: Mnu Nwz-208 - JRC JMR-92 Series Field Service Manual

4.3.1

26 Inch Monitor Unit: MNU NWZ-208

4.3.1.1 Replacing the 26 Inch MNU: NWZ-208
[Required Tools]
The tools shown in the following table are required for replacement work.
No. Name
1 Flat head
screwdriver
2 Phillips screwdriver
3
Diagonal pliers
4
Cable-tie *1
*1 A number of cable-ties may be required.
Before conducting replacement work, turn OFF the circuit breaker for the power supply of the
display unit.
Do not lose the screws as they will be needed again.
To prevent damage to the Unit during the replacement work, cut off cable-ties that fasten the
cable of the unit beforehand.
Chapter 4 Replacement procedure
Table Required Tools
Size
2 mm, 6 mm
Size #2, Size #3
－
－
4-314
Appearance