JRC JMR-92 Series Field Service Manual page 814

Packet Monitor
1. Click on the [Monitor] button of the enabled serial port to display the "Monitor"
dialog box, and click on the [Packet Monitor] tab.
2. Click on the [Start] button to start monitoring.
Monitoring will be started. If communication is being performed, the packets received are
displayed in the packet list.
To save the monitoring data in a log file, select the [Log] check box, and then click on the [Start]
button. A dialog box is displayed for selecting the file to be saved.
Enter the file name and click on the [OK] button. Monitoring will be started.
6-29 Chapter 6 Connection to External Navigation Equipment
Selected port information
Selection of serial
communication monitor or
packet monitor
(Packet Monitor can be
selected only for SLC/ALC
ports.)
Start/stop of monitoring,
clearing of the monitoring
data, and specification that
saves data in a log file at the
start of monitoring
List of packets received (in
time series)
Packet data
The data of the packet
selected in the packet list is
displayed.