JRC JMR-92 Series Field Service Manual page 669

Step 4 Set up the new GIF and replace..
Set up the switches and jumper pins of the new GIF by referring following informations.
- Ship's List
- Chapter 2.5 "DIP-SW and Jumper Pin Settings"
- GIF you just removed.
Next, assemble the new GIF by repeating the removal work in the reverse order. Please make
sure to tighten all the screws and connect all the cables back in place.
Exercise caution when handling the FFCs as they are very fragile.
When installing the FFCs, be careful not to insert them slanted or bend them.
Chapter 4 Replacement procedure
W82
GIF
J821
SLC
PＳ
ＳＳ
J8115
4-448
RIF
W81
J835
J822
PＳ
GIF
ＳＳ