JRC JMR-92 Series Field Service Manual page 905

3. Enter the folder name to back up
Type an arbitrary folder name and then click on [OK] button.
That folder will be created into your USB storage device and following folders will be
copied in it.
service folder
system folder
user
VERSION.TXT
7.5.4.4 5254 - Renew the INI file of Conning Display INI file.
Password 5254 can change the contents, placement of information of the Conning display by
renewing the INI file. The Conning Block in RADAR or in ECDIS will also change by this.
1. Connect your USB storage device or CD-ROM which contains new INI file for
Conning Display into the Display Unit.
2. Enter the Password 5254 on the Task Menu.
Conning Setting File Update dialog will appear.
3. Choose the folder which contains the new Conning INI file, and then click on the
[OK] button.
The new INI file will be loaded, and the Conning Display will be renewal.
4. Start up Navigation Data Monitoring (Conning Display) to confirm the Conning
Display contents
Chapter 7 Troubleshooting
has
has
folder has
describes software version.
7-82
installation information.
system configuration information.
user configuration information.