Restoring Backup Data - JRC JMR-92 Series Field Service Manual

5.2.2 Restoring Backup Data

To restore backup data to this equipment, perform the following procedure.
Connect a USB memory stick or other external storage medium containing backup data.
1.
Press the [Power] button on the operation panel.
The [Power] button illuminates. After a while, the task menu is displayed.
2.
Click on the [Data Backup/Restore] button on the task menu.
The "Backup/Restore" dialog box appears.
3.
Click on the [Data Restore] tab
4.
Select the drive in which backup data is stored from the drive selection combo box.
5.
In the [Data Type] combo box, select the type of the data you are restoring.
All:
Except Charts:
[Start] button
Restores all of the user data.
Restores the user data excluding chart data.
Drive selection combo box
[Data Type] combo box
5-7 Section 5 Software Update