JRC JMR-92 Series Field Service Manual page 880

Message
ACCI
AIS ACT (MAX Target)
AIS (Communication Failed, Direct)
AIS (Communication Failed, Main
LAN)
AIS (Communication Failed, Sub
LAN)
AIS (Invalid)
AIS (Lost)
AIS (MAX Target)
AIS (New Target)
AIS (Unavailable)
ALC #n (Communication Failed, Main
LAN)
ALC #n (Communication Failed, Sub
LAN)
Anchorage Area
Anchorage Prohibited
Anemometer (Communication Failed,
Main LAN)
Approach to mariner entered feature
Archipelagic Sea Lane
ARCS (Chart Shift)
ARCS (Security Failed)
ARCS (Shift to WGS84)
ARCS (Unknown Datum)
Arrived at WPT
AutoPilot (Communication Failed,
Main LAN)
AutoPilot (Communication Failed,
Sub LAN)
AutoPilot (Invalid, #n)
Location of
occurrence
TCS The activated AIS target count
reached the maximum activation target
count.
RADAR/AIS AIS serial communication failed
INS AIS communication failed in MAIN
LAN
INS
AIS communication failed in SUB LAN
INS
AIS data validity error
INS An AIS target is lost.
RADAR/AIS The AIS target count exceeded the
maximum target display count
RADAR/AIS The AIS is in the initial acquisition
state.
RADAR/AIS AIS data not received yet
INS Anemometer communication failed in
MAIN LAN
INS ALC#n communication failed in SUB
LAN
INS
Approaching an anchorage area
ECDIS Approaching an anchorage prohibited
area
ECDIS The activated AIS target count
reached the maximum activation target
count.
INS Anemometer communication failed in
MAIN LAN
ECDIS Reached the point set by the
navigation officer
ECDIS Approaching an archipelagic sea lane
ECDIS ARCS chart was shifted
ECDIS [ARCS] Alert related to ARCS security
ECDIS An ARCS chart was shifted to WGS84.
ECDIS Attempted to load an unknown
geodetic system chart
ECDIS Arrived at a WPT
INS AutoPilot communication was
disconnected in the Main LAN.
INS AutoPilot communication was
disconnected in the Sub LAN.
INS AutoPilot data validity error
7-57
Explanation
Chapter 7 Troubleshooting