JRC JMR-92 Series Field Service Manual page 819

6.7.5 Selecting a function to be assigned to each
contact output of SLC/ALC
1. Select any of the SLC1(M) to SLC4(M), SLC1(S) to SLC4(S), and ALC1 to ALC4
tabs.
2. Click on the [Detail] (detail setting) button of any of Contact 1 to Contact 8.
The "Contact-Detail" dialog is displayed.
3. Click on the function to be assigned from the combo box.
For the functions that can be assigned, refer to "Table. Contact outputs that can
be selected".
Selecting [ACK OUT]
Check boxes are displayed in the "Contact-Detail" dialog box.
Select the alert to be enabled by clicking on the check box of it. When the selected alert is
acknowledged, the contact is activated.
Selecting [Multi Alert Output]
Check boxes are displayed in the "Contact-Detail" dialog box.
Select the alerts to be enabled by clicking on the check box of them. When any of the checked
alert occurs, the contact is activated.
Chapter 6 Connection to External Navigation Equipment 6-34