JRC JMR-92 Series Field Service Manual page 131

Set TB2-7 of CMJ-560 Analog Option Circuit according to ship's analog sensors.
Settings for voltage signal input
When Analog Sensors output specifications is Voltage, set as follows.
・Input Signal Range ：-10V to +10V
Table. 2.5.19 Setting Table of Voltage Signal Input
Channel
1
2
3
4
Fig. 2.5.10 Voltage input Settings for CMJ-560 Analog Option Circuit
Setting Table of Voltage Signal Input
Reference
TB2 Short-circuit the pins 1-2 or Open all pins
TB7(±10V) Short-circuit the pins 1-5
TB3 Short-circuit the pins 1-2 or Open all pins
TB7(±10V) Short-circuit the pins 2-6
TB4 Short-circuit the pins 1-2 or Open all pins
TB7(±10V) Short-circuit the pins 3-7
TB5 Short-circuit the pins 1-2 or Open all pins
TB7(±10V) Short-circuit the pins 4-8
Short the pins 1-2.
Refer to the above table.
2-73
Setting
Short the pins.
Refer to the above table.
Chapter 2 System Configuration