JRC JMR-92 Series Field Service Manual page 414

Step 2 Remove the transmitter-receiver unit cover
Open the upper cover, loosen the screws (four M4 screws), remove the transmitter-receiver unit
cover, and disconnect the cables connected to the transmitter-receiver unit (ten cables). Slide the
cover of the transmitter-receiver unit to remove it.
Step 3 Remove the transmitter-receiver unit
Loosen the bolts (five M5 bolts) and remove the transmitter-receiver unit. Slide it upward to
remove.
Chapter 4 Replacement procedure
Slide the cover.
Loosen the four screws.
Slide the unit.
Tighten the five bolts.
4-194