JRC JMR-92 Series Field Service Manual page 478

Step 2 Remove the fan unit.
[Starboard side] Remove the connector that connects the fan. Remove the two screws that hold
the fan unit.
Starboard side
右舷側
ファンユニット
Step 3 Replace the fan.
After replacing the fan, install the fan unit following the disassembly procedure in the reverse
order and close the cover. Finally, set the safety switch to On and check the operation.
ファン Fan
Fan mounting
ファン取付金具
bracket
Chapter 4 Replacement procedure
Fan unit
4-258
固定ネジ
Remove the
two screws
（2 箇所）
Cable position
ケーブル位置
ファン
Fan
取付方向
orientation