JRC JMR-92 Series Field Service Manual page 672

Step 2 Remove the wires of the RIF.
Remove the wires of the RIF according to the following order.
2-1 • Tow-piece terminal blocks (J832, J833, J834, J836)
2-2 • Terminal block (TB838 ANT side or TB840)
2-3 • Interconnections (J831, J837 or J839, TB838 PSU side)
2-4 • GIF cable (J835: only if a GIF has been installed)
2-1 Remove the two-piece terminal blocks.
Remove the two-piece terminal blocks together with wires if wires are connected to them. They
can be removed by pulling them out.
Tow-piece terminal blocks: J832, J833, J834, J836
4-451
RIF
J836
J832
J833
J834
Chapter 4 Replacement procedure