JRC JMR-92 Series Field Service Manual page 749

3.
Click on the [Data Backup] tab
4.
Select the backup destination of your data from the drive selection combo box.
5.
In the [Data Type] combo box, select the type of the data you are backing up.
All:
Except Charts:
6.
Click on the [Start] button.
The following confirmation dialog box appears.
7.
Click on the [OK] button.
Copying of data to the backup destination you selected in the drive selection combo box starts.
Note
Do not perform any other operations until backup finishes. Doing other operations may
cause the backup operation to fail.
Section 5 Software Update
[Start] button
Backs up all of the user data.
Backs up the user data excluding chart data.
Drive selection combo box
[Data Type] combo box
5-6