JRC JMR-92 Series Field Service Manual page 726

Step 11 Put back all other cables and covers.
Turn OFF the circuit breaker of the main power line again. Put all the remaining cables and
covers back in place by repeating the same procedure in the reverse order. Please make sure to
tighten all the screws and connect all the cables back in place.
When reinstalling the two metal planks, be careful with vertical direction.
Right
Wide
To reconnect the cables and the two-piece terminal blocks, connect them to the same
locations as before removing them.
Step 12 Reset the usage time.
(1) Reset the usage time of the UPS. For the reset method, please refer to " 4.4.4.1 Clearing
operation time of Workstation" in the Instruction Manual.
Step 13 Dispose of the used UPS battery.
When disposing of used batteries, follow the regulations and/or rules of the local regulatory
authority which has control over the location of disposal.
This completes the replacement of the UPS battery.
Wide
4-505
Wrong
Narrow
Narrow
Chapter 4 Replacement procedure