Table of Contents
Advertisement
(3) Check the COM port in the Step1 Setup Interface item.
Check that COM6:NCE-5605 Virtual COM Port is selected. Do not select any other COM
port. After checking, press the Open button.
(4) Press the "Get Version" button in the Step2 Select Software item. Subsequently, select
OPERATION-APL (Ver.V01.**) from the tab. (**: Firmware version)
(5) Press the "Browse..." button in the Step3 Select update file item. When the Explorer
screen is displayed, select the latest TOPU CMP firmware file (OPU_APL_***.img).
Section 5 Software Update
5-28
Hide quick links:
Advertisement
Table of Contents
