JRC JMR-92 Series Field Service Manual page 587

Launch the Initial setting tool
A USB flash drive which has the Initial setting tool and the Lisence file is required for this work
No
1 A USB flash drive which contains the
Initial setting tool and the Lisence file *1
*1 Do not use Flash drives which are password protected or encrypted.
Before conducting work, always be sure that all of cables, connectors, are connected
securely.
Since "The Initial Setting Tool" is an auto-run application, be sure that connect your USB
flash drive before turning on the power.
For the details that how to obtain "The Initial Setting Tool", please contact our head office
or a nearby branch or local office beforehand.
1: Connect your USB flash drive
Before you turn on the power of the Display Unit, connect your USB flash drive which contains
the Initial setting tool and the Lisence file.
Chapter 4 Replacement procedure
Table Required Tools
Name
4-366
Appearance example