JRC JMR-92 Series Field Service Manual page 808

(*3) In the case of the port used for a data output, it is used.
Refer to "4.10 Setting Data Output".
[port settings for data output]
[CHx] check box
[Sensor] combo box : "－"
6.6.3 To change the communication settings of the
Serial Port
1. Click the [Detail] button of the enabled serial port and display the [Detail]
dialog.
(*1) Sensor name display pattern
[For sensor other than SLC Gyro I/F]
Sensor Alert(from Subsystem)
(*2) Display pattern of alert handling setting
[Various sensors (*1)]
(*1) Other than "Alert(from Subsystem / to CAM / to BNWAS)", and "DSC"
[When the sensor is " IAS(MODBUS)"]
[When the sensor is "Alert(from Subsystem)"]
: Select to enable.
6-23
[For SLC Gyro I/F]
Gyro Sensor Heading Sensor 1
Log Sensor Log 1
Chapter 6 Connection to External Navigation Equipment
For SLC Gyro I/F,
sensor names are
displayed in two
lines. (*1)
Displayed only for
SLC CH8-CH10
Alert handling
setting (*2)