JRC JMR-92 Series Field Service Manual page 613

Step 3 Replace the e-Token.
Disconnect and replace the e-Token being connected to the upper base of the NDC-1590. The
color of the e-Token is blue with a JEPPESEN company tag which is written the System ID.
Be careful not to mistake e-Token for HASP. The color of HASP is green.
The appearance of e-Token and HASP may change without notice.
Since the e-Token has been fixed by cable-ties, cut them before disconnecting it.
After replacement is completed, fasten the new e-Token again with cable-ties.
Chapter 4 Replacement procedure
Blue
CYC-735 e-Token
CYC-344
HASP
CYC-735
e-Token
4-392