JRC JMR-92 Series Field Service Manual page 711

Step 11 Put back all other cables and covers.
Turn OFF the circuit breaker of the main power line again. Put all the remaining cables and
covers back in place by repeating the same procedure in the reverse order. Please make sure to
tighten all the screws and connect all the cables back in place.
When reinstalling the two metal planks, be careful with vertical direction.
Right
Wide
To reconnect the cables and the two-piece terminal blocks, connect them to the same locations
as before removing them.
This completes the replacement of the UPS input filter.
Chapter 4 Replacement procedure
Wide
4-490
Wrong
Narrow Narrow