JRC JMR-92 Series Field Service Manual page 563

Step 8 Insert HASP and e-Token.
Remove the HASP and the e-Token being connected to the upper base of the NDC-1590 and
insert them into the corresponding connectors on the upper base of the NZC-1590 CCU Repair Kit.
Then, fasten them with cable-ties.
The color of the HASP is green. The color of the e-Token is blue with a JEPPESEN company tag
which is written the System ID.
Green
CYC-344 HASP
Insert both the HASP and the e-Token securely all the way to the roots. When fastening them,
be sure to fasten securely so that there is no looseness.
Be aware not to insert the HASP and the e-Token into wrong connectors.
The appearance of e-Token and HASP may change without notice.
Chapter 4 Replacement procedure
Blue
CYC-735 e-Token
4-342