JRC JMR-92 Series Field Service Manual page 438

Step 5 Remove the transmitter-receiver unit.
[Starboard side] Remove the four screws (M5). Remove the bolt (M4) and remove the three
screws (M4).
Remove the bolt Ｍ4 ボルト
Ｍ4 ねじ
Remove the three
screws (M4)
（3 箇所）外す
Transmitter-receiver unit
送受信ユニット
Starboard side
右舷側
Remove the cable that is connected to the transmitter-receiver unit and remove the unit towards
the front.
Starboard side
右舷側
Chapter 4 Replacement procedure
(M4)
外す
Remove the four
（4 箇所）外す
Transmitter-receiver unit
送受信ユニット
4-218
Ｍ5 ねじ
screws (M5)